Repair parts - List of Manufacturers, Suppliers, Companies and Products

Thread reinforcement and repair parts "Heli-Coil" "Kobsert"

It is an ideal solution for metal materials with low shear strength, such as aluminum die casting, to ensure high vibration resistance and torsional resistance.

■Helicoil When using bolts on a base material with low shear strength, the threads can easily be damaged. If you attempt to repair it, you may need to replace the entire product, but by using a helicoil, you can simply replace the helicoil itself, reducing the risk of needing to replace the entire product for thread repair. This can keep costs to a minimum. ■Kobsert Used for reinforcing threads and repairing damaged threads. It can be mechanically secured firmly without the need for additional fixing pins, washers, or chemical adhesives. Kobserts with sealing rings maintain even higher airtightness. Additionally, it is possible to replace old ones with new ones. Therefore, Kobserts with sealing rings can extend the lifespan of applications and provide high cost-effectiveness. Assembly is also simple and easy. It can be installed easily by anyone without requiring specialized skills. 【Features】 - Reinforcement of threads - High airtightness and corrosion resistance - Excellent seismic resistance - Wide variety - Easy installation - Replaceable

Company：ベルホフ
Price：Other

Transport machinery

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aluminum extrusion thread reinforcement and repair part "HELICOIL"

It is possible to keep costs to a minimum! The risk of damaging the threads during the tightening of steel bolts is reduced.

We would like to introduce the 'HELICOIL' that we handle. Using bolts on a base material with low shear strength carries the risk of thread damage, but by using this product, we can prevent the risk of complete replacement of the product during thread repair. Additionally, when fastening with iron bolts, the risk of thread damage is reduced, contributing to a decrease in defect rates, and it is expected to increase the pull-out load by approximately 40% compared to unreinforced threads. 【Features】 ■ Prevents the risk of complete replacement of the product during thread repair ■ Reduces the risk of thread damage when fastening with iron bolts ■ Contributes to a reduction in defect rates ■ Expected to increase pull-out load by approximately 40% compared to unreinforced threads ■ Can keep costs to a minimum ■ Compatible with automatic assembly ■ Available in various types, with and without tangs *For more details, please refer to the PDF document or feel free to contact us.

Company：ベルホフ
Price：Other

Work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Newsletter November 2023: Repair of Cracks in Forging Press Machine Frame

Hinode MS Newsletter November 2023: Forging Press Frame Crack Repair

【Product PR】 The "MS Method (Mechanical Stitch)" is a revolutionary repair technique (Mechanical Stitch Method) that addresses metal cracks using mechanical methods. Since it does not apply any heat, there is no "thermal distortion." It prevents residual stress from occurring in other areas and avoids secondary damage such as new cracks. Metal cracks are one of the concerns in equipment maintenance. Repairs using conventional welding methods change the base material around the crack due to heat, leading to residual stress and distortion, which always carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress from heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and achievements ■ Completion of work in a short period → Does not significantly reduce the operating rate of equipment ■ Advantages in safety and environmental aspects → No use of fire, thus no impact on the operating rate of other equipment or the environment For more details, please contact us.

Company：日之出水道機器メカニカルスティッチ部
Price：Other

Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Metal Crack Repair [LNS Method] Chemical and Steelmaking Equipment Case Study

■□■A completely new metal crack repair that is not welding■□■ Please contact LNSJAPAN.

The LNS method is a technology that uses specially designed screws and reinforcement materials (LOCK) to physically remove cracks with a metal touch. It has achieved numerous results and has a wealth of case studies. Complete solution for equipment crack repair. ● For more details, please download the catalog or contact us.

Company：ＬＮＳＪＡＰＡＮ
Price：Other

Reinforcement and repair materials
Renovation and repair methods
Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

M39 M42 M52 thread reinforcement and repair parts

It is possible to strengthen the screw threads by using low-strength materials such as aluminum and fiber-reinforced plastics.

HELICOIL is a spring-shaped coil made from wire, which can be inserted into a tapped base material to reinforce the threads. Using bolts on base materials with low shear strength carries the risk of thread damage, but by using this product, the risk of having to completely replace the product during thread repair is prevented. Additionally, when fastening with iron bolts, the risk of destroying the threads is reduced, contributing to a decrease in defect rates, and it is expected to increase the pull-out load by approximately 40% compared to unreinforced threads. [Features] - Prevents the risk of complete product replacement during thread repair - Reduces the risk of thread destruction when fastening with iron bolts - Contributes to a reduction in defect rates - Expected to increase pull-out load by approximately 40% compared to unreinforced threads - Can keep costs to a minimum - Compatible with automatic assembly *For more details, please refer to the PDF document or feel free to contact us.

Company：ベルホフ
Price：Other

Work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

August 2012 Issue MS Newsletter Aluminum Intercooler

【Product PR】 The "MS Method (Mechanical Stitch)" is a groundbreaking repair technique (Mechanical Stitch Method) that addresses metal cracks using mechanical methods. Since it does not apply any heat, there is no "thermal distortion." It prevents residual stress from occurring in other areas and also prevents secondary damage such as new cracks. Metal cracks are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods change the base material around the crack due to heat, leading to residual stress and distortion, which always carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress from heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and achievements ■ Completion of construction in a short period → No significant decrease in equipment operating rates ■ Advantages in safety and environmental aspects → No use of fire, so there is no impact on the operating rates of other equipment or the environment For more details, please contact us.

Company：日之出水道機器メカニカルスティッチ部
Price：Other

Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Screw hole repair Permanent measures Screw hole regeneration Insert installation Plastic platen screw hole

We will repair the crushed screw holes, bolt holes, and damaged threads of the die plate and cylinder head to their original size. As a permanent solution!

【Product PR】 The screw thread repair using the MS method (Mechanical Stitch) demonstrates outstanding effectiveness in terms of precision, durability, and cost compared to conventional methods. This technology utilizes our special bolts for repairs. Since it can be performed on-site, it allows for reduced lead times and cost savings. It enables permanent solutions compared to conventional products. 【Features】 ■ No hardening due to heat and no residual stress ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and achievements ■ Completion of construction in a short period → Does not significantly reduce the operating rate of equipment ■ Advantages in safety and environmental aspects → No use of fire, thus no impact on the operating rate of other equipment or the environment For more details, please contact us.

Company：日之出水道機器メカニカルスティッチ部
Price：Other

others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

November 2017 Issue MS Newsletter Press Machine Oil Tank

【Product PR】 The "MS Method (Mechanical Stitch)" is a groundbreaking repair technique (Mechanical Stitch Method) that uses mechanical methods to address cracks in metal. Since it does not apply any heat, there is no "thermal distortion." It prevents residual stress in other areas and avoids secondary damage such as new cracks. Cracks in metal are one of the concerns in equipment maintenance operations. In general welding repair methods, the base material around the crack changes due to heat, leading to residual stress and distortion, which always carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress from heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and track record ■ Completion of construction in a short period → Does not significantly reduce the operational rate of equipment ■ Advantages in safety and environmental aspects → Since no fire is used, there is no impact on the operational rate of other equipment or the environment For more details, please contact us.

Company：日之出水道機器メカニカルスティッチ部
Price：Other

Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thread reinforcement and repair parts "HELICOIL Plus"

It is possible to strengthen the screw threads by using low-strength materials such as aluminum and fiber-reinforced plastics.

HELICOIL is a spring-shaped coil made from wire, which can be inserted into a tapped base material to reinforce the threads. Using bolts on base materials with low shear strength carries the risk of thread damage, but by using this product, the risk of having to completely replace the product during thread repair is prevented. Additionally, when fastening with iron bolts, the risk of damaging the threads is reduced, contributing to a decrease in defect rates, and an increase in pull-out load of approximately 40% is expected compared to unreinforced threads. 【Features】 ■ Prevents the risk of complete product replacement during thread repair ■ Reduces the risk of thread damage when fastening with iron bolts ■ Contributes to a reduction in defect rates ■ Expected pull-out load increase of approximately 40% compared to unreinforced threads ■ Can be kept to a minimum cost ■ Compatible with automatic assembly *For more details, please refer to the PDF document or feel free to contact us.

Company：ベルホフ
Price：Other

Work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Thread reinforcement and repair parts "HELICOIL Smart"

It is possible to reinforce the screw threads by using low-strength materials such as aluminum and fiber-reinforced plastics.

HELICOIL is a spring-shaped coil made from wire, which can be inserted into a tapped base material to reinforce the threads. Using bolts on base materials with low shear strength carries the risk of thread damage, but by using this product, the risk of having to completely replace the product during thread repair is prevented. Additionally, when fastening with iron bolts, the risk of destroying the threads is reduced, contributing to a decrease in defect rates, and an increase in pull-out load of approximately 40% is expected compared to threads without reinforcement. 【Features】 ■ No need to remove the tang ■ Prevents the risk of complete product replacement during thread repair ■ Reduces the risk of thread destruction when fastening with iron bolts ■ Contributes to a reduction in defect rates ■ Expected increase in pull-out load of approximately 40% compared to threads without reinforcement ■ Can be kept to a minimum cost ■ Compatible with automatic assembly *For more details, please refer to the PDF document or feel free to contact us.

Company：ベルホフ
Price：Other

Work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

August 2014 Issue MS Newsletter Bracket

【Product PR】 The "MS Method (Mechanical Stitch)" is a revolutionary repair technique (Mechanical Stitching Method) that uses mechanical methods to address cracks in metal. Since it does not apply any heat, there is no "thermal distortion." It prevents residual stress from occurring in other areas and also prevents secondary damage such as new cracks. Cracks in metal are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods change the base material around the crack due to heat, leading to residual stress and distortion, which always carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress due to heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and track record ■ Completion of construction in a short period → Does not significantly reduce the operating rate of equipment ■ Advantages in safety and environmental aspects → Since no fire is used, there is no impact on the operating rate of other equipment or the environment For more details, please contact us.

Company：日之出水道機器メカニカルスティッチ部
Price：Other

Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

April 2018 Issue MS Newsletter Engine Framework

【Product PR】 The "MS Method (Mechanical Stitch)" is a groundbreaking repair technique (Mechanical Stitching Method) that uses mechanical methods to address cracks in metal. Since it does not apply any heat, there is no "thermal distortion." It prevents residual stress in other areas and avoids secondary damage such as new cracks. Cracks in metal are one of the concerns in equipment maintenance operations. Repairs using conventional welding methods change the base material around the crack due to heat, leading to residual stress and distortion, which constantly carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress due to heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and track record ■ Completion of work in a short period → Does not significantly reduce the operating rate of equipment ■ Advantages in safety and environmental aspects → Since no fire is used, there is no impact on the operating rates of other equipment or the environment For more details, please contact us.

Company：日之出水道機器メカニカルスティッチ部
Price：Other

Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

August 2020 Issue MS Newsletter Cast Bracket

August 2020 Newsletter - Cast Iron Bracket

【Product PR】 The "MS Method (Mechanical Stitch)" is a revolutionary repair technique (Mechanical Stitch Method) that addresses metal cracks using mechanical methods. Since it does not apply any heat, there is no "thermal distortion." It prevents residual stress in other areas and avoids secondary damage such as new cracks. Metal cracks are one of the concerns in equipment maintenance. In typical welding repair methods, the base material around the crack changes due to heat, leading to residual stress and distortion, which always carries the risk of "crack recurrence" and "secondary damage." 【Features of the MS Method】 ■ No hardening or residual stress from heat ■ Elimination of secondary damage ■ Maintenance of stable quality → Integrated system repairs using jigs, etc. → Accumulation of know-how, experience, and track record ■ Completion of work in a short period → No significant reduction in equipment operating rates ■ Advantages in safety and environmental aspects → No use of fire, thus no impact on the operating rates of other equipment or the environment For more details, please contact us.

Company：日之出水道機器メカニカルスティッチ部
Price：Other

Renovation and repair methods

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Repair parts - List of Manufacturers, Suppliers, Companies and Products

Repair parts Product List